The difference between a single panel and a double panel is that a single panel has wiring on one side only, while a double panel has wiring on both sides. Double-sided board is an extension of the single-panel, meaning that the single-panel line is not enough so as to turn to the opposite side of the double-sided board is also an important feature is that there are through-holes. Therefore, the method and steps of double-sided board copying are similar to those of single-sided board copying.
Simple single panel copy board and double-sided board copy board steps:
1, scan the upper and lower layers of the circuit board, save two BMP pictures.
2, open the board copying software Quickpcb2005, point “file” “open the bottom picture”, open a scanned picture. With PAGEUP to enlarge the screen, see the pad, according to PP to place a pad, see the line according to the PT line …… like a child tracing the same, in this software tracing again, point “Save” to generate a B2P file.
3, and then point “file” “open the bottom of the map”, open another layer of scanning color map; 4, and then point “file” “open the bottom of the map”, open another layer of scanning color map.
4, and then point “File” “Open”, open the previous saved B2P file, we see just copied the board, stacked on top of this picture – the same PCB board, holes in the same location, just different line connections. The same PCB board, holes in the same location, just different line connections. So we press the “Options” – “Layer Settings”, where the display of the top layer off the line and silkscreen, leaving only multi-layer vias.
5, the top layer of perforations and the bottom layer of the picture on the same location of the perforations, and now we like childhood tracing the same, tracing the bottom layer of the line can be. Then point “Save” – this time the B2P file will have a top and bottom of the two layers of information.
6, point “File” “Export as PCB file”, you can get a PCB file with two layers of information, you can then change the board or schematic or directly to the PCB plate factory production.
Single and double-sided board copying is the simplest and most common circuit board copying in PCB copying, RayMing Technology single and double-sided board copying is completed within 1 day, the success rate is 100%.
