PCB reverse engineering Thailand works through a straightforward remote process: you ship your physical board from Bangkok, Chonburi, or anywhere in the country via DHL or FedEx, and our engineering team returns complete Gerber files, schematics, and a verified BOM — typically within 5–8 working days. No local lab visit required. Every project runs under a signed NDA, and Thailand’s well-established international courier network means boards arrive at our facility in 2–3 business days.
Why Thai Engineers Need Remote PCB Reverse Engineering
Thailand’s electronics manufacturing sector — centered around the Eastern Seaboard Industrial Estate, Amata Nakorn, and Hemaraj — produces everything from automotive ECUs and hard-drive controllers to industrial automation boards. When an OEM discontinues a critical board, or a factory needs to replicate a legacy design for continued production, local options for full reverse engineering are limited.
Most Thai PCB fabrication houses focus on manufacturing, not analysis. Reverse engineering demands specialized equipment: X-ray imaging for inner-layer mapping, cross-sectioning for stackup verification, and LCR metering for passive component identification. Our facility operates this equipment daily across hundreds of projects per year, which means faster turnaround and higher accuracy than ad-hoc local attempts.
Common Scenarios from Thailand
- Legacy industrial controllers — Japanese-origin PLCs and servo drives used in Thai factories, discontinued with no spare boards available.
- Automotive ECU repair data — Thailand is Southeast Asia’s largest auto-assembly hub; engineers need schematics for diagnostics and rework.
- HDD and SSD controller boards — Seagate and Western Digital operate major facilities in Thailand; engineers sometimes need reference data for test fixtures.
- Medical device maintenance — Hospitals in Bangkok and Chiang Mai running imported equipment with obsolete control boards.
What You Receive: Deliverable Formats
| Deliverable | Format | Details |
|---|---|---|
| Gerber Files | RS-274X / Gerber X2 | All copper layers, solder mask, silkscreen, drill files (Excellon). Ready for fabrication quote. |
| Schematic | PDF + Altium/KiCad/OrCAD | Netlist-verified, component values annotated, power rails traced. |
| Bill of Materials | Excel (.xlsx) | Manufacturer part numbers, package types, cross-references for Thai-available equivalents where applicable. |
| Stackup Report | Layer count, dielectric thickness (±0.5 mil), copper weight, impedance notes for boards ≥4 layers. | |
| Pick-and-Place | CSV | X/Y coordinates, rotation, reference designators — ready for SMT line import. |
All files are delivered electronically via encrypted transfer. Your original board is returned to your Thai address by the same courier, insured and tracked.
How the Remote Process Works from Thailand
Step 1 — Initial Assessment
Send us clear photos (top, bottom, and edge profile) of your board. We confirm layer count estimate, board dimensions, component density, and provide a fixed-price quote within 24 hours. No surprises.
Step 2 — Ship the Board
Pack the board in anti-static foam and ship via DHL Express or FedEx International Priority from any Thai city. Bangkok to our lab: 2–3 business days. Customs declarations are straightforward — mark as “electronic sample for analysis, no commercial value.” We provide a customs reference letter if needed.
Step 3 — Engineering Analysis
Our team performs high-resolution scanning (1200 DPI optical + X-ray for inner layers), component identification under microscope, and full netlist extraction. For boards with 6+ layers, we use controlled cross-sectioning at designated test points to verify internal routing and dielectric spacing.
Step 4 — File Delivery & Review
You receive the complete file package. We include a 15-day review window — if you find any discrepancy during prototype fabrication or design review, we correct it at no extra charge.
Shipping & Customs: Thailand-Specific Notes
Thailand’s customs process for outbound electronics samples is well-defined. Key points for smooth transit:
- HS code: 8534.00 (printed circuits) — no export license required for sample quantities.
- Courier choice: DHL Express has the largest hub in Thailand (Bangna facility); FedEx operates out of Suvarnabhumi. Both offer door pickup from industrial estates in Rayong, Chonburi, Pathum Thani, and Lamphun.
- Declared value: Declare realistic sample value. Over-declaring triggers unnecessary duty assessment on return.
- Return shipping: We ship back to your Thai address with full insurance. Transit time for return: 3–4 business days.
Engineers in Taiwan and other Asia-Pacific locations use the same courier workflow with similar transit times.
Capability Limits & Honest Constraints
We handle boards from 1 to 24 layers. Here is what to expect at the edges of complexity:
| Board Class | Typical Accuracy | Turnaround | Notes |
|---|---|---|---|
| 1–2 layer, through-hole | 99%+ netlist match | 3–5 days | Fastest category; most passive components easily identified. |
| 4–6 layer SMT | 98–99% netlist match | 5–8 days | Standard for most industrial boards from Thai factories. |
| 8–12 layer HDI | 95–98% netlist match | 8–12 days | Microvias and buried vias require X-ray + cross-section; some blind-via transitions may need prototype validation. |
| 14–24 layer | Case-by-case | 12–18 days | Feasibility review required before quoting. Not all boards are candidates. |
Trace/space resolution: we reliably capture down to 3 mil (0.076 mm) trace and 3 mil space. Below that — common on some RF or high-density BGA breakout regions — we flag the area and discuss tolerance with you before finalizing.
Pricing Signals for Thailand-Based Clients
Pricing depends on layer count, board size, and component density. Rough ranges for budgeting:
- 2-layer board, ≤100 components: starting from USD 350–600
- 4-layer board, 200–400 components: USD 800–1,500
- 6–8 layer, 500+ components: USD 1,800–3,500
- 10+ layers or HDI: quoted after feasibility review
All quotes are fixed-price, issued before you ship. No hourly billing, no scope creep. Payment via wire transfer (SWIFT) or PayPal — both well-supported from Thai banks.
NDA & IP Protection
Every project operates under a mutual NDA signed before any board ships. We do not retain your design files after delivery and confirmation. Boards are handled in a restricted-access lab, and no project data is shared between clients. Engineers working on projects from Austria, Finland, or Thailand receive the same contractual protections.
Who Uses This Service in Thailand?
- Contract manufacturers (EMS/ODM) in the Eastern Seaboard who need to reproduce boards when original design files are lost or never transferred.
- Maintenance teams at Thai power plants, petrochemical facilities (Map Ta Phut), and cement plants running imported European or Japanese control systems.
- Startups and R&D labs in Bangkok’s Ari/Silom tech corridor who want to benchmark competitor products or recover their own early prototypes.
- University research groups at Chulalongkorn, KMUTT, and Suranaree who need reference schematics for teaching or grant-funded hardware projects.
How Does PCB Reverse Engineering in Thailand Compare to Local Options?
Thailand has capable PCB fabrication houses — Hana Microelectronics, Cal-Comp Electronics, and KCE Electronics among them — but fabrication and reverse engineering are fundamentally different disciplines. Fabricators build boards from files; reverse engineers create files from boards. The equipment, software, and operator skill sets overlap by less than 20%.
Sending a board to a dedicated reverse engineering lab means access to purpose-built X-ray systems, impedance analyzers, and engineers who do this work exclusively. The result is faster delivery and fewer errors than asking a local fab house to attempt analysis as a side project.
Clients across Southeast Asia — including those using our Colombia service and Denmark service — follow the same remote workflow with consistent results regardless of origin country.
Check feasibility for your project
Send the chip marking or board details and tell us what you need to recover. Add clear photos if available.
Request a feasibility reviewHow long does shipping take from Thailand to your lab?
DHL Express and FedEx International Priority from Bangkok typically deliver in 2–3 business days. Pickup is available from all major industrial zones including Amata, Hemaraj, and Lamphun. Return shipping takes 3–4 business days.
Can you reverse engineer boards with BGA components and no markings?
Yes. We use X-ray imaging to map BGA ball patterns and pin counts, then cross-reference against package databases. Unmarked or re-marked ICs require additional identification time (typically 1–2 extra days), and we flag any components we cannot conclusively identify.
Do I need to send multiple boards or just one?
One board is sufficient for most projects. For boards above 8 layers, sending a second sample is recommended — it allows destructive cross-sectioning on one while preserving the other for return. We advise on this during the quoting stage.
Is my design data kept confidential?
Every engagement is covered by a mutual NDA signed before shipping. We delete all project files from our systems 30 days after you confirm delivery. No data is shared between clients, and lab access is restricted to assigned engineers only.
What file formats can you deliver?
Standard deliverables include Gerber RS-274X, Excellon drill files, schematic in PDF and native EDA format (Altium, KiCad, or OrCAD per your preference), BOM in Excel, and pick-and-place CSV. We can also export ODB++ if your Thai fabricator requires it.
Working on a board like this?
Send the chip marking or two photos. You get feasibility, lead time and price within 24 hours, and the check costs nothing.
Get a free quote