Bao'An Shenzhen China

Texas Instruments IC Unlock | Families We Can Read

Oct 8, 2026  /  PCB COPY

texas instruments ic unlock: Texas Instruments MSP430 microcontroller mounted on a circuit board awaiting firmware extraction

Texas Instruments IC Unlock — What Is Realistically Possible?

Texas Instruments IC unlock is the authorized extraction of firmware or configuration data from TI microcontrollers and DSPs whose code-protection fuses or JTAG locks prevent normal readout. Our lab handles over 30 TI device families — from the ubiquitous MSP430 to C2000 real-time controllers and CC-series wireless SoCs — with documented success on most fuse-level and JTAG-lock protections. Authorization proof is required before any work begins, and some newer devices with hardware-root-of-trust remain infeasible.

Why TI Chips Need Specialized Unlock Techniques

texas instruments ic unlock: Texas Instruments MSP430 microcontroller mounted on a circuit board awaiting firmware extraction

Texas Instruments implements protection differently across product lines. An MSP430F149 uses a simple JTAG fuse that can be bypassed with well-understood physical techniques. A newer MSP430FR5994 adds FRAM IP-encapsulation segments. A C2000 F28379D layers code-security modules (CSM) with 128-bit passwords plus zone-select blocks. Each mechanism demands a different approach — there is no universal “TI unlock” procedure.

This diversity is exactly why generic firmware-extraction shops often fail on TI parts. Our engineers maintain family-specific toolchains and have logged results across hundreds of TI part numbers since 2009.

TI Families We Service — Protection Levels and Feasibility

TI Family Common Parts Protection Type Feasibility Typical Turnaround
MSP430 (Flash) F149, F169, F449, F2274 JTAG fuse blow High — well-characterized 3–5 working days
MSP430 (FRAM) FR5969, FR5994, FR2433 JTAG fuse + IP-encapsulation Medium — depends on IP-encap config 5–10 working days
C2000 (Piccolo) F28035, F28069 CSM 128-bit password High 5–8 working days
C2000 (Delfino) F28335, F28379D Dual-zone CSM + ECSL Medium — dual-zone adds complexity 7–12 working days
Tiva-C (TM4C) TM4C123GH6PM, TM4C1294 Flash protection registers + JTAG lock High for most revisions 3–7 working days
CC-series (BLE/Zigbee) CC2541, CC2530, CC1310 Debug-lock bit + flash protection High (CC253x/254x); Medium (CC13xx/CC26xx) 5–10 working days
TMS320 DSP F2812, F2808, C5509A CSM password High for F28xx; case-by-case for C5000 5–10 working days
SimpleLink (newer) CC2652, CC1352 Hardware root-of-trust, secure boot Low — often infeasible Feasibility check required

Key takeaway: older JTAG-fuse and CSM-password families have high success rates. Newer parts with ARM TrustZone or hardware-root-of-trust (CC26x2, CC13x2R7) are significantly harder, and we will tell you upfront if we cannot proceed.

How TI Code-Security Modules Actually Work

JTAG Fuse (MSP430 Flash)

A physical fuse on the die disables the JTAG test port. Once blown, standard programmers like the MSP-FET cannot connect. Our approach uses controlled physical access to restore debug connectivity without damaging the flash array. Success rate on MSP430F1xx/F4xx exceeds 95% across our case history.

Code Security Module — CSM (C2000)

The CSM uses a 128-bit password stored in a dedicated flash sector. If the password is all 0xFFFF (unprogrammed) or partially erased, extraction is straightforward. When a full custom password is programmed, our engineers use die-level techniques to recover the password or bypass the lock. Dual-zone CSM on F2837xD/S parts doubles the effort but remains within reach for most configurations.

Debug Lock + Flash Sector Protection (Tiva-C, CC-series)

ARM Cortex-M-based TI chips use a combination of debug-access-port (DAP) lock bits and per-sector flash protection. The DAP lock prevents SWD/JTAG enumeration entirely. We restore debug access through targeted fault injection or physical intervention, then read protected sectors. On CC2541 BLE SoCs — one of our most-requested TI parts — turnaround averages 5 working days.

What We Deliver After a Successful TI IC Unlock

  • Raw binary image (.bin) — byte-for-byte copy of the flash/FRAM contents.
  • Intel HEX or TI-TXT — formatted for direct re-programming with Code Composer Studio, UniFlash, or MSP Flasher.
  • Fuse/configuration report — documents fuse states, option bytes, and protection register values so you can replicate the original configuration.
  • Verification hash — SHA-256 of the extracted image for your records.

All files are delivered via encrypted channel under NDA. We do not retain copies after delivery unless you request archival.

Authorization and Legal Requirements

Engineer examining a decapped IC die under microscope during unlock procedure

We perform Texas Instruments IC unlock only for the rightful IP owner or an authorized agent. Before work starts, you must provide one of the following:

  • Proof of design ownership (original schematic, BOM, purchase order for the IC).
  • Written authorization from the IP holder (letter on company letterhead or NDA-backed email).
  • Legacy-maintenance justification (end-of-life equipment where the original vendor no longer supports the firmware).

We decline jobs that lack clear authorization. Read our full policy on whether IC unlock is legal and which jobs we turn away.

Process: From Submission to Delivered Firmware

  1. Submit your request — tell us the exact TI part number (including package suffix and revision), quantity, and your authorization basis.
  2. Free feasibility assessment — we confirm the protection type, estimate success probability, and quote cost and turnaround within 1–2 business days.
  3. Ship the chip(s) — send one or more samples. For non-destructive methods we return the IC intact; destructive methods (rare, used on some CC-series) consume one sample.
  4. Extraction and verification — our engineers perform the unlock, verify the image by checksum comparison where a reference is available, and package deliverables.
  5. Encrypted delivery — files sent via secure link; physical ICs returned via tracked courier.

If we cannot extract a valid image, you pay nothing for the unlock attempt. Shipping costs are non-refundable.

Pricing Signals for TI IC Unlock

Final pricing depends on the specific part, protection level, and whether destructive decapping is required. Rough ranges based on our recent project history:

Category Starting Price (USD) Notes
MSP430 JTAG-fuse (Flash) $300–$500 Non-destructive in most cases
MSP430 FRAM with IP-encap $500–$900 Depends on encapsulation depth
C2000 CSM (single-zone) $400–$700 Higher if custom 128-bit password is set
C2000 CSM (dual-zone) $700–$1,200 F2837xD/S family
Tiva-C / CC253x / CC254x $350–$600 CC2541 BLE is our highest-volume TI part
CC13xx / CC26xx (older revisions) $600–$1,500 Feasibility check required first
TMS320 F28xx DSP $400–$800 CSM-password approach

Volume discounts apply for batches of 5+ identical parts. Request a quote with your part number for an exact figure.

When TI IC Unlock Is Not Feasible

Honesty matters more than landing every job. Here are the cases where we will tell you no:

  • Hardware root-of-trust devices — CC2652R, CC1352P, and newer SimpleLink parts with secure-boot chains. The protection is fundamentally different from fuse-blow or CSM; current techniques do not reliably bypass it.
  • Physically damaged die — if the flash array is cracked, corroded, or has been subjected to prior failed unlock attempts with excessive heat, data recovery odds drop sharply.
  • No authorization — we will not proceed without ownership proof regardless of the part’s technical feasibility.

If your part falls into a gray zone, submit it for a free feasibility check through our IC extraction service and we will give you a straight answer within 48 hours.

Related IC Unlock Services by Vendor

TI is one of many vendors we support. If your board carries mixed silicon, we can handle multiple chips in a single project. Engineers working with legacy BLE or sensor designs may also need Realtek IC unlock for Wi-Fi/Ethernet controllers. Industrial control boards often pair TI DSPs with Sharp microcontrollers or serial EEPROMs like the 24C64 for calibration storage.

For ARM-based TI alternatives built on the Cortex-M0 core, our GD32 unlock guide explains how GigaDevice parts differ from their STM32 and Tiva-C counterparts in practice.

Check feasibility for your project

Send the chip marking or board details and tell us what you need to recover. Add clear photos if available.

Request a feasibility review
Can you unlock an MSP430 without destroying the chip?

Yes, for most MSP430 Flash-based parts (F1xx, F2xx, F4xx) our technique is non-destructive. The JTAG fuse is bypassed without decapping, and the IC is returned functional. FRAM-based MSP430FR parts with IP-encapsulation may require more invasive methods depending on the configuration, but we confirm the approach before starting.

How long does a C2000 CSM unlock take?

Single-zone CSM unlocks on parts like the F28035 typically take 5–8 working days from the moment we receive the chip. Dual-zone CSM on F2837xD/S devices can extend to 7–12 working days due to the additional password recovery step. We provide a firm estimate during the free feasibility check.

Is it possible to unlock CC2652 or CC1352 SimpleLink chips?

These newer SimpleLink parts use hardware-root-of-trust with secure boot, which is fundamentally more resistant than earlier CC253x/CC254x debug-lock protection. As of our current capability, success rates on CC2652/CC1352 are low and we do not guarantee results. We recommend submitting for a feasibility assessment before committing.

Do I need to send the entire PCB or just the chip?

Either works. Sending the bare IC is preferred because it simplifies handling and avoids risk of board damage. If desoldering is difficult — especially with QFN or BGA packages — send the whole board and our team will remove the chip safely. We return both the IC and board after extraction.

What if the TI chip was previously tampered with?

Prior failed unlock attempts — especially those involving excessive heat, incorrect voltage glitching, or amateur decapping — can damage the flash array or bond wires. We assess the die condition under microscope before quoting. If damage is visible, we will tell you the realistic recovery odds and may decline the job rather than charge for a likely failure.

Working on a board like this?

Send the chip marking or two photos. You get feasibility, lead time and price within 24 hours, and the check costs nothing.

Get a free quote

Related reading

WhatsApp Send board details