RayMing Technology dsPIC30F5015 microcontroller decryption program is mature, our dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010 and dsPIC30F6010A and other dsPIC30F series chip decryption price is low, and the cycle of MCU crack short. If you have dsPIC30F5015 chip decryption or other dsPIC30F microcontroller decryption needs, welcome to call and visit us.

dsPIC5015 device performance profile:
High performance modified RISC CPU:
-Improved Harvard architecture
-C compiler optimized instruction set architecture
-Flexible addressing mode 84 basic instructions
-24-bit wide instructions, 16-bit wide data
12 KB on-chip flash program space
-512 bytes of on-chip data RAM
-1 byte of non-volatile data EEPROM
-16 x 16-bit operating register array
-Up to 30 MIPS operation:

• DC to 40 MHz external clock input
• 4 MHz, 10 MHz with PLL active (4x, 8x, 16x) oscillator inputs
  -27 interrupt sources
  -Three external interrupt sources
  8 user-selectable priority levels per interrupt
  -4 processor exceptions and software traps
  DSP engine features:
  -Mode and bit inversion modes
  -Two, 40-bit wide accumulators with optional saturation logic
  -17-bit x 17-bit single-cycle hardware decimal/integer multiplier
  -Single-cycle multiply-accumulate (MAC) operation
  -40-level barrel shift
  -Double fetch data
  Peripheral Characteristics:
  -High sink/pull current source I / O pins: 25 mA/25 mA.
  Three 16-bit timers/counters; 16-bit timer into 32-bit timer module
  4 16-bit capture input functions
  2 16-bit compare/ PWM output functions
• Dual compare mode available
  -3-wire SPITM module (supports 4-frame mode)
  -I2CTM module with multi-mode and 7-bit/10-bit resolution support
  -Addressable UART module with FIFO buffer
  Motor control PWM module features:
  -6 PWM output channels
• Complementary or independent output modes
• Edge and center aligned modes
  -4 duty cycle generators
  -Dedicated 4-mode time base
  -Programmable output polarity
  -Dead complementary mode time control
  -Manual output control
  -Trigger synchronized A/D conversion
  Quadrature Encoder Interface Module Features:
  -Phase A, phase B and index pulse inputs
  -16-bit up/down position counter
  -Counting direction status
  -Position measurement (x2 and x4) modes
  -Programmable input digital noise filter
  -Alternate 16-bit timer/counter mode
  -Interrupt/underflow position counter flip-flop
  Analog Features:
  -10-bit analog to digital converter (A/D) with:
• 500 ksps (10-bit A/D) conversion rate
• 6 input channels
• Conversion is available at sleep and idle
  -Programmable undervoltage detection and generation reset.

The dsPIC30F devices contain a high-performance 16-bit microcontroller (MCU) architecture with extensive digital signal processor (DSP) functionality inside. Based on the widespread use of dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010 and dsPIC30F6010A dsPIC30F series microcontrollers, the The demand for dsPIC30F crack is also increasing. Hualan Technology is pleased to offer dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010, dsPIC30F6010A, etc. dsPIC30F series chips for cracking with reduced price. Preferential activities.