PIC18F6585, PIC18F8585, PIC18F6680 and PIC18F8680 are high-performance microcontrollers with 64 KB enhanced flash memory and ECAN module.RayMing Technology PIC18F6585 microcontroller decryption, PIC18F8585 chip decryption, PIC18F6680 microcontroller crack and PIC18F8680 chip crack with low price and high success rate. If you have PIC18F6585, PIC18F8585, PIC18F6680 or PIC18F8680 MCU decryption needs, please contact Hualan Shenzhen Chip Decryption Center at 0755-27389625.

PIC18F6585 microcontroller: 48K bytes program memory, 24576 single-byte instructions; 3328 bytes SRAM, 1024 bytes EEPROM; 53 I/O ports, 12 10-bit A/D.
PIC18F8585 microcontroller: 48K bytes program memory area, 24576 single-byte instructions; 3328 bytes SRAM, 1024 bytes EEPROM; 69 I/O ports, 16 10-bit A/D.
PIC18F6680 microcontroller: 64K bytes program memory area, 32768 single-byte instructions; 3328 bytes SRAM, 1024 bytes EEPROM; 53 I/O ports, 12 10-bit A/D.
PIC18F8680 microcontroller: 64K bytes program memory area, 32768 single-byte instructions; 3328 bytes SRAM, 1024 bytes EEPROM; 69 I/O ports, 16 10-bit A/D.

Features of PIC18F6585, PIC18F8585, PIC18F6680 and PIC18F8680 microcontrollers:
High performance RISC CPU:
-Source-code compatible PIC16 and PIC17 instruction sets.
-Linear program memory addressing up to 2 megabytes
-Linear data memory addressed to 4096 bytes
-1 byte of data EEPROM.
-Up to 10 MIPS operation:

• DC – 40 MHz oscillator/clock inputs
• 4 MHz to 10 MHz oscillator/clock input with PLL
  -16-bit wide instruction, 8-bit ultra-wide data channel
  -Interrupt Priority Levels
  -31 levels, software-accessible hardware stacks
  -8 x 8 single-cycle hardware multiplier
  Peripheral Features:
  -High pour/pull current 25 mA/25 mA.
  -4 external interrupt pins
  -Timer0 module: 8-bit/16-bit timer/counter.
  Timer1 module: 16-bit timer/counter
  Timer2 module: 8-bit timer/counter
  Timer3 module: 16-bit timer/counter
  -Auxiliary oscillator clock options
• Timer1/Timer3
  -A Capture/Compare/PWM (CCP) module:
• Capture is 16-bit, max. resolution of 6.25 ns
  (TCY/16)
• Compare is 16-bit, max. 100 ns resolution (TCY)
• PWM output: PWM resolution from 1 to 10 bits
  -Enhanced Capture/Compare/PWM (CCP) module:
• Same capture/compare function, CCP
• 1, 2 or 4 PWM outputs
• Selectable polarity
• Programmable dead time
• Automatic shutdown of external events
• Automatic restart
  -The Master Synchronous Serial Port (MSSP) module has two modes of operation:
• 3-wire SPI™ (all 4 SPI modes supported)
• I2C™ Master and Slave modes
  -Enhanced addressable USART module:
• Supports RS-232, RS-485 and LIN 1.2.
• Programmable wake-up start bit
• Automatic baud rate detection
  -Parallel Slave Port (PSP) Modules
  Analog Features:
  -Up to 16-channel, 10-bit analog-to-digital (A/D) converter module:
• Fast sampling rate
• Programmable acquisition time
• Programmable acquisition time Conversion in sleep mode
  -16 levels of programmable low voltage detection (LVD) modules.
  (LVD) modules:
• Supports low voltage detect interrupt
  -Programmable undervoltage reset (BOR).
  -Dual analog comparators:
• Programmable input/output configuration

For PIC18F6585, PIC18F8585, PIC18F6680, PIC18F8680 and other Microchip PIC18F series of microcontroller decryption, RayMing Shenzhen Chip Decryption Center’s microcontroller cracking program is mature. Relying on the results of technical research and rich practical experience in decryption, we are committed to providing the most reliable and economically valuable decryption program for each chip.